Charpy Impact Testing Machine


Charpy Impact Testing Machine

Additional Information

Product Code IT-30

Charpy Test : The charpy test piece rests on alloy steel support anvils, fitted on the base of the machine rigidly held in position by Allen screws. End stopper is provided for quickly and accurately locating the test piece centrally between the supports.

Izod Test : The Izod test is clamped vertically in Izod support fitted on the base of the machine. The support is provided with a machined vertical groove to suit the test piece size. The front clamp piece and the Allen screw enable clamping of the test piece in correct height with the help of Izod setting gauge supplied.

Model IT-30 ( ASTM ) : This impact tester offered with 300J energy exclusively for Charpy test confirming to ASTM E-23. This machine is geometrically checked in the works to the more stringent requirements of the American standard. The accuracy of the machine is then verified by PROOF TEST by testing standard test specimens supplied the NIST, USA. Two sets ( Low & high energy-1 Set (4 Nos.) each.) must agree with the normal values within certain tolerance specified.


Yes! I am interested


Technical Specification

Model IT-30 IT-30 (D)
Max. capacity 300J / 168J 300J / 170J
Minimum Scale
Graduation
2J 0.5J
Approx. Size 1.1mX0.45mX1.65m
(H)
1.32mX0.45mX1.05m
(H)
Approx. Weight 375 kg 375 kg
IT-30 (ASTM)
Charpy Test
IT-1.5 IT-0.5
300J 15J 5J
2J 0.1J 0.05J
1.4mX0.5mX1.9m
(H)
0.5mX0.3 mX0.52m
(H)
0.5mX0.3mX0.52m
(H)
450 kg 70 kg 70 kg





Looking for "Charpy Impact Testing Machine" ?