Latest Products http://www.enmatest.co.in Latest Products Tue, 18 Feb 2020 16:01:02 +0530 en-us http://www.enmatest.co.in Digital Portable Hardness Testers http://www.enmatest.co.in/digital-portable-hardness-testers.htm http://www.enmatest.co.in/digital-portable-hardness-testers.htm Thu, 31 Oct 2019 00:00:00 +0530 Rockwell Hardness Testers http://www.enmatest.co.in/rockwell-hardness-testers.htm http://www.enmatest.co.in/rockwell-hardness-testers.htm Thu, 31 Oct 2019 00:00:00 +0530 Digital Micro Vickers Hardness Tester http://www.enmatest.co.in/digital-micro-vickers-hardness-tester.htm http://www.enmatest.co.in/digital-micro-vickers-hardness-tester.htm Thu, 31 Oct 2019 00:00:00 +0530 Features : The independent research and development of lifting system and positioning system, ensured the accuracy and repeatedly of the testing process The optical system designed by senior optical engineer (who worked in the Shanghai Optics And Fine Mechanics Institute, Chinese Academy of Science) not only meet the definition of hardness testing requirements, but also can observe the micro structure of the material With Vickers hardness and Knoop hardness testing capabilities, and testing force can be extended to 2 KG Testing method, testing power and operation time can be displayed directly on the LCD screen The hardness value can be displayed directly by entering the indentation diagonal length and avoid the complication of the look-up table According to different visual habits of the operators, the strength of the light source can be adjusted. To avoid the visual fatigue for long time operation The testing data able to be printed directly by the built-in printer Reserved image channel can be connected with computer, used the image analysis software to analyzing the physical and chemical properties of the material   Standard Accessories : 1 piece: 10X micrometer eyepiece; 10X and 40X objective lens; Vickers indenter; X-Y Testing Table; Flat Fixture; Thin Fixture, Small Parts Fixture; Water level; Power cable; Dust cover; Instruction Book; Hardness Conversion Tables; Certificate of quality; Warranty Card; Accessory case; 2 pieces: Standard block of hardness; 4 pieces: horizontal adjusting screw Digital Coating Thickness Gauge http://www.enmatest.co.in/digital-coating-thickness-gauge.htm http://www.enmatest.co.in/digital-coating-thickness-gauge.htm Wed, 30 Oct 2019 00:00:00 +0530 Coating thickness gauge is designed to test : Thickness of various thick protective coatings on various metals and alloys; Thickness of paint and other dielectrics – radioabsorbing, mastic, teflon, plastic, electroplating coatings on steel; Thickness of electroplating and paint coatings on non-ferromagnetic alloys and non-ferrous metals; Thickness of bitumen and other thick coatings on various metals and alloys; As well as relative humidity, air temperature, surface temperature, dew point temperature and difference between surface and dew point temperatures, estimate the depth of grooves and the surface roughness Electronic thickness gauge – device which widely used in shipbuilding and automotive industries for measuring the thickness of paint, in order to test the quality of products, also it used for determining technical condition of the tested objects. Advantages : Large thickness measurement range Convenience and ease in operation Minimum number of controls: one button – one function Graphical display with backlight Automatic recognition of probe Indication of the connected probe type Control of batteries Digital Surface Roughness Tester http://www.enmatest.co.in/digital-surface-roughness-tester.htm http://www.enmatest.co.in/digital-surface-roughness-tester.htm Wed, 30 Oct 2019 00:00:00 +0530 Features : Pocket size and economically price Large measuring range suitable for most materials Measures flat, outer cylinder and sloping surface Both Ra and Rz parameters in one instrument Features external calibration at keyboard Standard conform to ISO and DIN Rechargeable batteries, work while charging TR110 is equipped with Li-ion battery and backlight Standard delivery : Main unit Protection cover for pickup Specimen Ra AC Charger TIME certificate Instruction manual Warranty card Digital Ultrasonic Flaw Detector http://www.enmatest.co.in/digital-ultrasonic-flaw-detector.htm http://www.enmatest.co.in/digital-ultrasonic-flaw-detector.htm Wed, 30 Oct 2019 00:00:00 +0530 Advantages : Display of the device can be operated in any orientation – there are 4 options of display rotation, that allows user to customize the unit by himself, both for lefties and righties users. Instrument could be operated in both portrait and landscape orientations. Appointment of the ultrasonic flaw detector : To test the quality of welds and base metal of products; To detect corrosion, cracks, delaminations and other internal defects; To determine coordinates and parameter estimation of defects such as discontinuity, cracks and uniformity of material in products from metal, plastic, composites and other materials; To measure the thickness of products. Flaw detector is equipped with 3 standard type AA rechargeable batteries. The device can also operate from simple batteries the same type. Using the batteries of standard type allows autonomous operation of the device in almost any conditions Leeb Hardness Test Blocks http://www.enmatest.co.in/leeb-hardness-test-blocks.htm http://www.enmatest.co.in/leeb-hardness-test-blocks.htm Wed, 30 Oct 2019 00:00:00 +0530 Leeb Hardness Test Blocks : We offer wide range of Test Block for Digital Portable Hardness Tester of all range and scale. We offer low, medium and high hardness test block with all scale Rockwell, Brinell and Vickers hardness tester.Using the Genuine Leeb Scales (HL) : The Leeb rebound method was invented in 1975. Since then, Proceq has maintained the genuine Leeb standard HL. That means, a measurement of a sample showing a result of 750 HLD by Proceq in 1975, done with the first generation Equotip, would still deliver the exact same result today, done with the most recent generation. With Equotip test blocks, end users can check if their testers conform with this hardness unit, similarly to using a ruler for length measurements. During a Leeb hardness measurement, an impact body with a hard ball indenter is launched by spring energy against the sample, and then rebounds. The ratio of the rebound velocity vr to the impact velocity vi multiplied by 1000 yields the hardness value HL (Leeb hardness). Support Rings http://www.enmatest.co.in/support-rings.htm http://www.enmatest.co.in/support-rings.htm Wed, 30 Oct 2019 00:00:00 +0530 Rockwell Cum Brinell Hardness Tester http://www.enmatest.co.in/rockwell-cum-brinell-hardness-tester.htm http://www.enmatest.co.in/rockwell-cum-brinell-hardness-tester.htm Thu, 31 Oct 2019 00:00:00 +0530 Mitutoyo Surface Roughness Tester http://www.enmatest.co.in/mitutoyo-surface-roughness-tester.htm http://www.enmatest.co.in/mitutoyo-surface-roughness-tester.htm Wed, 30 Oct 2019 00:00:00 +0530 Features : 2.4” color LCD display includes backlighting and over-size fonts Display direction can be changed to be read vertically or horizontally right and left-handed Color tolerance judgments, evaluation curves and all data can be displayed in one of 16 languages Self-timed measurement supported Security management supports password protected function locks A micro-SD card supports high-volume portable data storage - up to 10,000 results can be stored Screen capture to memory card also supported Optional foot switch can be used for touch-free measurement Multiple output options include RS-232C and USB for maximum versatility Brochure.   Parameters : Rv, Rsk, Rku, Rc, RPc, RSm, Rmax, Rz1max, RzJIS, Rppi, RΔa, RΔq, Rlr, Rmr, Rδ, ς, HSC, Rpm, tp, Htp, Ra, Ry, Rz, Rq, S, Sm, Pc, R3z, mr, Rt, Rp, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Vo ( customizable ) ( R, AR, Rx: M-type ) Advanced Metallurgical Microscope http://www.enmatest.co.in/advanced-metallurgical-microscope.htm http://www.enmatest.co.in/advanced-metallurgical-microscope.htm Thu, 31 Oct 2019 00:00:00 +0530 Advanced inverted metallurgical microscope adopted high quality infinity optical system, and equipped with bright and dark field long working distance, infinite plan achromatic objective objectives, multi-optical system designed to support both binocular tubes observation and digital camera devices observation. Advanced Inverted Microscope can be widely applied for studying the microstructure of metal; it can conduct observation and photography in bright field, dark field, polarized light, differential interference. but also simultaneously measured and analyzed when it was equipped with special software. Inverted Metallurgical Microscope http://www.enmatest.co.in/inverted-metallurgical-microscope.htm http://www.enmatest.co.in/inverted-metallurgical-microscope.htm Thu, 31 Oct 2019 00:00:00 +0530 Mechanical Body : Axial focusing controls with large knobs, Pre-focussing Lever And Tension Adjustment Ring. Inverted quadruple nosepiece revolves on ball bearings. Mechanical stage is 150 X 200 mm. The mechanical stage has low positioned co-axial Controls on balls rolling on guide ways. Hand rest on both sides   Trinocular Head : Trinocular Siedentopf head inclined at 30 degree. Phototube for photomicrography. Diopter adjustment ring on ocular tube. Interpupiliary distance from 55 mm to 75 mm.   Illuminator : Koehler's Illumination. Aperture Iris Diaphragm and Field Iris Diaphragm 12/30 w Halogen Lamp. Adjustable Brightness. Filter Wheel Fixed in Light Path with Blue, Green & Yellow Filter.   Eye Piece : Wide field 10X,(20mm) Wide field 10X Paired, 15 X and 20 X Paired Grain Size and Micrometer Scale Eyepiece Polerizing filter in mount Analyser for Polerised Light   Objectives : DIN long working distance metallurgical grade. PL 10X, PL 20X, PL 50X, PL 100X ( 60X & 80 X optional ) 6v / 20W Halogen Tungsten Bulb (Spare) Styrofoam Moulded Pack. Trinocular Metallurgical Microscope http://www.enmatest.co.in/trinocular-metallurgical-microscope.htm http://www.enmatest.co.in/trinocular-metallurgical-microscope.htm Thu, 31 Oct 2019 00:00:00 +0530 Trinocular Observation Head : Siedentopf observation head inclined at 45°. Vertical phototube for micro photography light split (80:20). Diopter adjustment ring on ocular tube (±5). Interpupillary distance from 54mm to 75mm.   Objectives (Infinity Corrected) : M Long Working Distance Plan Achromatic 5X M Long Working Distance Plan Achromatic 10X M Long Working Distance Plan Achromatic 20X M Long Working Distance Plan Achromatic 50X ( S L ) Dry   Mechanical Body : Co-axial focusing system with large knobs, PRE-FOCUSING LEVER & TENSION ADJUSTMENT RING. Quadruple nosepiece on ball bearing. Mechanical stage is 180mmX155mm. Moving range - 75mmX40mm. The Mechanical stage has low positioned co-axial controls on ball bearing guide ways. Novotest Ultrasonic Thickness Gauge http://www.enmatest.co.in/novotest-ultrasonic-thickness-gauge.htm http://www.enmatest.co.in/novotest-ultrasonic-thickness-gauge.htm Thu, 31 Oct 2019 00:00:00 +0530 Ultrasonic Thickness Gauge NOVOTEST UT-1 is designed for rapid non-destructive thickness testing of : Products made of various metals, alloys and other materials; Glass, plastic, composite and other products from non-metallic materials; the walls of the tanks, pipes, casing parts, sheets, overhead, and other structures, including the corroded surfaces, pitted, with scum, etc.; Products during their production and operation; metal products for diagnostic and expert work with one-side access to the tested object. Ultrasonic method for measuring thickness : Ultrasonic Thickness Gauge NOVOTEST UT-1 operates on the principle of measuring the propagation time of ultrasound in the product. The pulse generator produces a high frequency electrical pulses that excite the piezoelectric transducer (Probe). At the same transducer are converted electrical signals into the elastic (mechanical) vibrations – sound waves. These waves propagate from the surface of the input to the reflective (bottom) surface, re-taken and converted into electrical signal by means of PET. After that device calculates the thickness of tested object.Advantages : Wide range of measuring thicknesses Convenience and ease in operation Minimum number of controls Select the type of probe through single button Preset velocity of ultrasound Graphical display with backlight Compensation of probe delay Control of the batteries Mapping the presence of acoustic coupling on the graphic display Fixation of the last measurement result in the removal of the transducer surface Digital Rockwell Hardness Tester http://www.enmatest.co.in/digital-rockwell-hardness-tester.htm http://www.enmatest.co.in/digital-rockwell-hardness-tester.htm Thu, 31 Oct 2019 00:00:00 +0530 Operation : Various parameters of test can e set on front panel by operation of key board and observing LCD display Viz high / low limits, dwell time, auto / manual start, printer selection, scale selection etc. All set data can be verified / edited by pressing SCL key one after another Machine operation is very simple. The normal mode is a bar followed by "SET" indication. Raise elevating screw slowly through bar indicator till "SET" position which will show "PRESS START" indication. Now press "START" button. Loading / unloading cycle will be completed and hardness is shown on LCD display with High/ Good / Low indication. Lower down elevating screw. Panel will show normal mode for next test Computerized Micro Vickers Hardness Tester http://www.enmatest.co.in/computerized-micro-vickers-hardness-tester.htm http://www.enmatest.co.in/computerized-micro-vickers-hardness-tester.htm Thu, 31 Oct 2019 00:00:00 +0530 Features : Fully Computerised (PC Based) Vickers Hardness Machine Direct and accurate measurement of Vickers Hardness number using "State of the Art" image processing technology Wide testing range: from soft metal up to hardest High accuracy and repeatability of measurement at all loads Faster measurement yielding to higher productivity Small size of indentation makes it a non destructive testing on finished components Motorised loading and unloading cycle Small loads allow testing of thin sheet metals Advanced Window XP based software User friendly software with Windows Features Online indentation setting and focusing on PC monitor Advance image processing: Algorithms implemented for precise calculation of hardness numbers with various options to cover all ranges of specimen Batch file Processing: Option for Data, storage and reports generation Statistical Evaluation: Software for calculating standard deviation, mean, medium, histogram Wide options in calibration mode Calibration / Verification on PC monitor makes easier to operate 'FIE' Computerised Hardness Tester is a simple and accurate means to produce automatically measure the diamond indentation to give Vickers hardness numbers These testers are suitable for measuring the hardness of precision metallic parts with wide testing range - from soft to hard and their accurate results are widely acclaimed. These testers strictly confirm to IS 1754 - 2002  Accessories : Standard Test Block Diamond Indentor Weights Flat Anvil Vee-type anvil ( Small & Big ) Spanners Electric Cord & PC interface cord Video Capture Vickers software CD Instruction Manual Manual Rockwell Hardness Tester http://www.enmatest.co.in/manual-rockwell-hardness-tester.htm http://www.enmatest.co.in/manual-rockwell-hardness-tester.htm Thu, 31 Oct 2019 00:00:00 +0530 TWIN Rockwell Cum Superficial Hardness Tester http://www.enmatest.co.in/twin-rockwell-cum-superficial-hardness-tester.htm http://www.enmatest.co.in/twin-rockwell-cum-superficial-hardness-tester.htm Thu, 31 Oct 2019 00:00:00 +0530 Portable Surface Roughness Tester http://www.enmatest.co.in/portable-surface-roughness-tester.htm http://www.enmatest.co.in/portable-surface-roughness-tester.htm Wed, 30 Oct 2019 00:00:00 +0530 All Functions for convenient Operations : Complies with major International standards such as ISO, DIN, CNOMO, JIS, ASME Data Memory/Battery Operation: Ten complete Data records can be stored.Rechargeable battery operation provides versatile usof the line independent of the line supply. Measuring in different positions: The small and light handysurf measures not only flat,horizontal,but also vertical and overhead surfaces. Direct data Transfer to the PC- The RS 232 serial interface is used to transfer measured data,parameters and profile curves directly to the PC. EINSTEIN II TFT Ultrasonic Flaw Detector http://www.enmatest.co.in/einstein-ii-tft-ultrasonic-flaw-detector.htm http://www.enmatest.co.in/einstein-ii-tft-ultrasonic-flaw-detector.htm Wed, 30 Oct 2019 00:00:00 +0530 Features : Fast Scanning Speed Wide Viewing Angle Auto DAC with - 6dB and -14dB Curves Li-ion battery for long battery operation Low noise production Technical Specifications : Test Range - 10 mm to 5000 mm ( in steel ). In Hot Key Mode it has 13 preset values. In Fine Mode it is adjustable in step of 1mm Velocity - 1000 meters/second to 9999 meters/second . In Hot Key Mode it has 7 preset values. In Fine Mode it is adjustable in step of 1 meter/second, Delay - Variable from 0 to 3000 mm Gain - Total Amplifier Gain  - 140 dB Calibrated Gain - 100 dB adjustable in steps of 0.5,1,2,6,12 or 20 dB Rejection - 0 to 80% FSH with LED indication Rectification - Full wave rectification with filtering Frequency - Broad Band amplifier 0.5 MHz to 15 MHz Test Modes - Pulse Echo and Transmit/Receiver Connectors - BNC and LEMO ( Size 1 ) both are provided Monitor - Dual gate adjustable in 1% of Screen width with Positive/Negative logic, Gate Expand modes Gate Expand - Expands Range to width of the gate A-Scan memory - 200 Trace Patterns can be stored, recalled, printed or transferred to PC via RS-232 serial port Calibration Set-up  - 50 different calibration set-ups can be Stored and Recalled Software - Using “EinSoft TFT” software A-Scan with calibration set-ups can be transferred to PC via RS-232 serial link for storage in PC or printing Display - High brightness colour TFT LCD Display. Display area 122x92mm (320 x 240 Pixel). Eleven different colour scheme options Full Screen - By pressing Zoom key A-Scan can be displayed in Full Screen area Reference A-Scan - Reference A-Scan pattern of standard test object can saved and recalled in the background for easy comparison during testing DAC - DAC curve can be entered using minimum 2 to maximum 10 points and then digitally drawn with –6dB and –14dB curves Digital Readout and Trig Function - Thickness/Depth can be displayed in digital readout when using a normal probe and Beam path, Surface Distance and Depth are directly displayed when angle probe is in use Update Rate - 50Hz Power - Lithium-Ion Battery pack 14.4VDC, 4AH, gives 8 hours continuous operation from fully charged battery Charger - Input Voltage 100 to 240 VAC. Charges status indicator is provided. Temperature - 0 to 55° C Size - 152x255x70 mm ( HxWxD ) Weight - 2.3 Kgs. with Battery Brinell Hardness Test Machine http://www.enmatest.co.in/brinell-hardness-test-machine.htm http://www.enmatest.co.in/brinell-hardness-test-machine.htm Wed, 30 Oct 2019 00:00:00 +0530 Features : Measures hardness Highly durable Superior performance Longer working life Charpy Impact Testing Machine http://www.enmatest.co.in/charpy-impact-testing-machine.htm http://www.enmatest.co.in/charpy-impact-testing-machine.htm Wed, 30 Oct 2019 00:00:00 +0530 Charpy Test : The charpy test piece rests on alloy steel support anvils, fitted on the base of the machine rigidly held in position by Allen screws. End stopper is provided for quickly and accurately locating the test piece centrally between the supports.Izod Test : The Izod test is clamped vertically in Izod support fitted on the base of the machine. The support is provided with a machined vertical groove to suit the test piece size. The front clamp piece and the Allen screw enable clamping of the test piece in correct height with the help of Izod setting gauge supplied.Model IT-30 ( ASTM ) : This impact tester offered with 300J energy exclusively for Charpy test confirming to ASTM E-23. This machine is geometrically checked in the works to the more stringent requirements of the American standard. The accuracy of the machine is then verified by PROOF TEST by testing standard test specimens supplied the NIST, USA. Two sets ( Low & high energy-1 Set (4 Nos.) each.) must agree with the normal values within certain tolerance specified. Metallurgy Image Analyzer Software http://www.enmatest.co.in/metallurgy-image-analyzer-software.htm http://www.enmatest.co.in/metallurgy-image-analyzer-software.htm Wed, 30 Oct 2019 00:00:00 +0530 Measurement Tools : Calibration Length Angle Perimeter Width Radius Area Color Counting Flakes Draw Free Circle Metallographic Tools : Grain Size Phase ASTM E 566 1245 Decarburization ASTM E 1077 Coating Thickness ASTM B 487 Nodularity ASTM A 247 Porosity ASTM 276 Inclusion ASTM E 454 – E 1245 Particle Measurement Density Filters Invert Annotation Back Ground Removal Amalgamation Phase on Rectangular Area Amalgamation Some more Features from Main Menu : Save & Save As Report Preview Zoom Inclusion DIN DIN PER Gallery Company Name Delete Calibration Open Image Open Image & Convert Show Capture Image Modify or Comparison Image Gray Scale Image Resize Picture Options Capture Shore Hardness Tester http://www.enmatest.co.in/shore-hardness-tester.htm http://www.enmatest.co.in/shore-hardness-tester.htm Wed, 30 Oct 2019 00:00:00 +0530 Technical Specifications : Digital durometer for shore hardness testing pocket size Shore Hardness A DIN 53505, ASTM D2240, ISO 7619, JISK 7215 Hardness Result, Average Value, Max. Value Hardness Range 0 - 100 HA Measurement Deviation < 1% H Resolution 0.1 Auto switch off with RS232C interface Operating temperature 0 - 40°C Power supply 4 X 1.5V AAA (UM - 4) Battery Low Battery indicator Dimensions: 162 mm x 65 mm x 38 mm Weight 172 gm Standard Delivery : Main Display unit Test Specimen Pocket case Certificate Instruction manual Carrying case Hardness Tester Accessories http://www.enmatest.co.in/hardness-tester-accessories.htm http://www.enmatest.co.in/hardness-tester-accessories.htm Wed, 30 Oct 2019 00:00:00 +0530 Industrial Video Borescopes http://www.enmatest.co.in/industrial-video-borescopes.htm http://www.enmatest.co.in/industrial-video-borescopes.htm Wed, 30 Oct 2019 00:00:00 +0530 Metallurgical Microscopes http://www.enmatest.co.in/metallurgical-microscopes.htm http://www.enmatest.co.in/metallurgical-microscopes.htm Wed, 30 Oct 2019 00:00:00 +0530 Micro Vickers Hardness Testers http://www.enmatest.co.in/micro-vickers-hardness-testers.htm http://www.enmatest.co.in/micro-vickers-hardness-testers.htm Wed, 30 Oct 2019 00:00:00 +0530 Surface Roughness Testers http://www.enmatest.co.in/surface-roughness-testers.htm http://www.enmatest.co.in/surface-roughness-testers.htm Wed, 30 Oct 2019 00:00:00 +0530 Thickness Gauges http://www.enmatest.co.in/thickness-gauges.htm http://www.enmatest.co.in/thickness-gauges.htm Wed, 30 Oct 2019 00:00:00 +0530 Ultrasonic Flaw Detectors http://www.enmatest.co.in/ultrasonic-flaw-detectors.htm http://www.enmatest.co.in/ultrasonic-flaw-detectors.htm Wed, 30 Oct 2019 00:00:00 +0530